Disclaimer: Godox sent the WEC Kit2 2.4 Ghz Wireless Microphone system for an unbiased review. Some links may be affiliate links, which means I earn a small commission for qualifying sales. There is no additional cost to you.
Godox has recently released the WEC 2.4 Ghz Wireless Microphone system with two options, the Kit1 and Kit2. The Kit2, which I am reviewing, includes two transmitters and one receiver, making it great for interviews or vlogs where you have a duo or need to chat with others. The Kit1 comes with one transmitter and one receiver but omits the charging case, which comes in super handy, so choose carefully.
So, what’s the difference between the WEC Kit1 and Kit2? The Kit1 comes with one less transmitter and no charging case. As well, it also comes with one less wind shield since there is only one transmitter.
Godox WEC Wireless Mic Kit2 Package Contents
In the box, you get:
- 1X Wireless Receiver (Stored in charging case)
- 2X Wireless Transmitters (Stored in charging case)
- 2X Windshield Muffs
- USB A to USB Type C Cable
- 3.5 mm TRS Cable
- 3.5 mm TRS-TRRS Cable
- Zippered Storage Pouch
- Charging Case
- Manual
Technical Specs
| WEC Transmitter Unit | WEC Receiver Unit |
| + Battery Capacity: 140 mAh battery + Working Time: ~ 8 Hours + Charging Time: 2 Hours + Pickup Pattern: Omnidirectional + Frequency Response: 20Hz – 20KHz + Maximum SPL: 110dB + Dynamic Range: 86dB + Wireless Range: Up to 200 meters (clear line of sight) + Working Temp: -10℃ to 50℃ (14ºF to 122ºF) + Dimensions: 48mm × 22mm × 16mm + Weight: ~ 12 grams | + Battery Capacity: 200 mAh battery + Working Time: ~ 8 Hours + Charging Time: 2 Hours + Working Temp: -10℃ to 50℃ (14ºF to 122ºF) + Dimensions: 48mm × 28mm × 15mm + Weight: ~ 16 grams WEC Charging & Carrying Case + Battery Capacity: 1400 mAh battery + 2 Full Charges (2X Tx & 1X Rx) + Charging Time: 2 Hours + Dimensions: 63mm × 85mm × 30mm + Weight: 84 grams |
Price & Value
The WEC Kit1 retails for $59 USD and the WEC Kit2 goes for $99 USD, plus applicable taxes.
The link above is a referral link, which means that I earn a small commission for each qualifying sale. However, there is no additional cost to you.
Buttons & Ports – Transmitter Unit
The WEC transmitter unit has a pressable power button on the side of the unit, which is used to turn the unit on and off manually with a long press. However, the units are automatically powered on when removed from the case.
Above the power button is an orange button that activates the Denoise feature with a single press. It also doubles to pair the units with a long press of the orange button in conjunction with a long press of the volume + button on the receiver.
The underside of the transmitter has a plastic clip, which is spring-loaded to secure to clothes.
The bottom of the unit has the USB C charging port if you do not have the charging case. However, if you have the Kit2, which comes with the charging case, it uses the metal contacts on either side of the USB-C charging port. The front of the unit houses the microphone grill. Note that there is no 3.5 mm audio port on the transmitter units for a Lavalier mic.
There are also green LED lights on the front of the unit to show whether it is powered on or off. The lights change to orange if the Denoise feature is activated.
Buttons & Ports – WEC Receiver
The receiver unit has two LEDs to show if one or both transmitters are connected.
One side of the receiver unit has two buttons. The volume down button adjusts the gain level up or down with a single press, while a long press switches the audio from mono to stereo. The volume up button increases the gain level, and a long press activates manual pairing if needed. Above the two buttons is a USB type C port to charge the unit without the charging case. The bottom of the receiver has two metal contacts so it can be charged in the charging case.
The other side of the receiver unit has a power button and a 3.5 mm audio port to connect the receiver to a camera or phone.
Buttons & Ports – WEC Charging Case (Kit2)
The charging case that comes with the Kit2 has a USB type-C port at the bottom. The top of the unit has a small lip on the lip to open the case up to gain access to the transmitters and the receiver.
The front of the unit shows the available battery life remaining on the charging case.
WEC Carrying Case
The included carrying case that comes with the Kit2 securely houses the charging case and protects it with a soft layer to separate it from the wired net that houses the wires, wind shields and charging cable on the top lip pocket.
Build Quality
The build quality is decent on the WEC transmitter and microphones. However, since they are both pretty lightweight at 12 grams and 16 grams, the exterior is mostly all plastic build. There is no noticeable creaking or flexing to the body when force is applied. You’ll still want to be careful to avoid dropping the units, especially in cold environments, to prevent the plastic from cracking. The rear clip is nicely tensioned and stays in place easily. I did notice that the units easily picked up my fingerprints, but I have fingerprints that are on the oilier side.
Setting Up The Microphone System
The transmitter and receiver were automatically paired once I removed them from the case. Note that there is a plastic protective covering over the metal charging contacts that needs to be removed before the first time use to allow automatic charging and pairing with the charging case if you get the Kit2 version.
WEC Settings
Since there is no display screen on the receiver, reliance on the LED lights is key to operating the units.
All green LEDs on the receiver and transmitters mean that everything is powered on and connected. Only one LED lights up on the receiver if only one transmitter is used. Flashing green lights on the receiver and transmitter means that the devices are powered on but require manual pairing.
Orange LEDs on the transmitters mean that the Denoise feature is turned on. If both transmitters are being used, pressing the Denoise button automatically activates Denoise on both units simultaneously.
Long pressing the volume down button on the receiver switches the audio to stereo and changes the LEDs to blue on the receiver. They are green when mono mode is active.
The microphones turn on with the gain level at the medium setting, but a short press of the volume down or volume up buttons adjusts the gain by 6 dB in either direction. I didn’t notice an LED indicator light change when adjusting the gain level. It would have been nice to have that visual cue, but the tactile button press will do.
Red LEDs mean that the battery level is 10% or less.
One setting that I did not find was the ability to quickly mute the microphones.
Audio Quality
The audio sounds clean and clear when using the microphones, with or without the wind shield on the medium gain level. Here are some audio samples. They were taken while connected to my Sony A7III camera. The camera’s recording level was set to 13, and the gain level was set to the default medium setting.
Laptop Or PC Use?
The WEC Wireless Mic also supports digital signal transmission, so you can simply connect the microphone to your computer with a USB Type C cable.
Wind Shield
The wind shield is easy to attach to the transmitter due to the protruded lip on both sides of the top mic element. Once applied, it stays in place pretty well.
Battery Life
The transmitters and receiver can all be charged by USB type C cable. However, having the charger case negates the need for plugging in three USB C cables at the same time. Breathing white LEDs mean the units are charging, and solid white LEDs mean charging is complete.
WEC Charging Case
To recharge the charging case, simply plug a USB C cable at the bottom and unplug with the digital display reads 100%. Btw, it is possible to simultaneously charge both the case and the transmitters and receivers at the same time when they are in the charging case.
Recording Distance
The WEC system is rated for up to 200 meters of recording distance, providing that there is a clear line of sight. I’ve tested the recording distance up to 40 meters without any issues, which is already such a long distance and leaves another potential 160 meters if needed.
What I’d Like To See Changed
While the system performs well on the audio end, I’d like a visual clue to know when my gain adjustments were successfully made. I’d also like to be able to quickly mute the mics.
Summing Up
The Godox WEC wireless microphone system is surprisingly capable for such a small package. If you value a lightweight setup for your camera or phone, this is one of the lightest wireless microphones I’ve tested. It also doesn’t compromise on audio quality. The audio was clean and clear, with no distortion or audio dropouts, even at 40 meters out.
Up to 8 hours of battery life is enough for a full day of shooting for most users, but if you need to, you can easily top them up quickly with the charging case if you purchase the Kit2 version. Even though it costs more, I think the included charging case and carrying pouch is worth the quality of life improvements for charging and quick connecting out of the case.
Overall it is a great, compact wireless microphone system that delivers excellent audio performance.
If there is anything that I missed in the review, or if you have any questions that I did not cover, please leave a comment below.
The link above is a referral link, which means that I earn a small commission for each qualifying sale. However, there is no additional cost to you.
